In this article we’re going to examine how to create your own dog mask. We’ll cover the basics and then go on to take a look at a number of the more advanced tips and tricks that you can use.

For those who have a dog that likes to bark, and particularly if your dog loves to play in the garden and other regions of the house, you will need to get them some particular dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the set-up which will look a little scary at first, but it’s really very straightforward. All you’ve got to do is take a cardboard cutting board and dog filter mask cut the cardboard into the shape of your mask. You can not simply cut a rectangular shape from the cardboard, so you will have to cut around the edge of the mask so you get something which resembles a cone. The main thing here is to be realistic with what type of paper plate which you’re using.

Then you will have to wrap the cardboard around the edges of the paper plate, making sure there is a good seal between the two pieces so you can ensure that nothing will leak when you place the mask on. Be sure that the edges are cut so the edges are not sharp, as this can damage the edges of the mask.

Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making certain it runs smoothly and evenly across the entire mask. You’ll want to start with one side of the mask , so that you can work your way around it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it’s best that you leave about one-fifth of an inch of paint on the edges so that it runs over the cardboard.

Don’t worry too much about the paint getting stuck into your mask. It’s easy to eliminate it later, and it’ll leave you with a wonderful finished mask to show off to everybody! It’s also a good idea to wash away any excess paint once you are done, so that you don’t wind up with smudges or smears on your dog.

Then it’s time to paste the mask onto your dog’s head. First you will need to make sure that you get a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it’s secure, then you can begin to glue the mask onto the dog’s face. Take the piece of cardboard that’s used for the foundation of the mask and then fold it over. Be sure that it’s quite powerful and then use your hands to secure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds until you have the mask snugged securely onto the face of your dog. Don’t make the folds too large or else it could look messy. As soon as you’ve done this, you can then take out the mask and attach the cardboard ears. And attach the other part of the mask onto the dog. Make certain that the ears are level and make certain it’s not too short or long as this can cause some problems with the mask slipping off the dog’s face.

If you’re using a dog mask as your dog protection, you will need to do some sanding to make certain it’s safe on your dog. You can accomplish this by sanding off any excess paper which might have been eliminated from your mask.